Manufacture of protective cap
The model of the D-30KP2 engine under the protective cap of Plexiglas.
To make the model as long as possible to keep its presentable original appearance, we strongly recommend using the cap.
What are the features of such products?
Cap of Plexiglas for the model
The cap solves several important tasks:
- protects the model from curious hands and mechanical damage.
- protects against dust and dirt, which means the model should not be cleaned and vacuumed every month.
Protective cap of Plexiglas.
Show case for model
For models of large sizes, we recommend using not a cap, but a show case of Plexiglas around the perimeter of the model. This is due to the fact that the size of the Plexiglas sheet is 2050x3050mm, which means that if the model is larger, you will have to make a cap of two parts, and solve the problem with the joint in the middle, put supports on the model, so that it does not sag.
Show case solves the problem of mechanical damage to the model by curious visitors, but does not solve the problem of dust and dirt on the top of the model, it should also be considered.
Here is an example of the model with a show case:
Show case around the perimeter of the Ethno Park model 3,5x3,5m.
For reliable protection and durability of your model, we recommend to order the cap.
How to order the model with protective cap?
Or send the task to the e-mail: email@example.com. For any questions call: +7 (812) 934-47-43.